International Journal of Chemical Separation Technology
Volume 5, Issue 1 (2019)
Published
Table of contents
-
ADSORPTION OF POLLUTANTS FROM EXHAUST GAS USING WASTE MATERIAL DERIVED ACTIVATED CARBON
Abstract: The emission of gas from motor vehicle engine causes pollution to the environment. The emission of motor vehicle contains pollutants such as hydrocarbons (HC), carbon monoxide (CO), oxides of sulfur (SO2), carbon (CO2) and nitrogen (NOx), particulates, etc. In the present work, we prepared an activated carbon from Banana peel. The activated carbon was prepared by carbonizing banana peel in furnace. The resulted carbon was activated by chemical activation with …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 1–4 Read article
-
ROBOTIC ARM DESIGN BY 3D PRINTING TECHNOLOGY
Abstract: The work is designed to develop a pick and place robotic arm by using the 3D printing technology. This type of 3D printing is an additive manufacturing process. In this manufacturing process the three dimensional objects are produced by converting digital 3D model into physical 3D object. These 3D models can be designed by using AUTOCAD software or SOLIDWORKS and it can be transferred to 3D printing software. In 3D …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 21–27 Read article
-
Production of Waste Animal Bone as a Heterogeneous Solid Base Catalyst for Transesterification of Jatropha Oil
Abstract: Heterogeneous catalyst plays a vital role in transesterification process, especially in view of cost and reusability. In this study, heterogeneous solid base catalyst was prepared by impregnating the waste animal bone with different weight percent (wt%) KOH solution followed by drying and calcination at 900 °C for 3 hr. Having screened the catalytic performance and basicity of animal bone loaded with different K-compounds, 12 wt% KOH loaded on animal bone …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 28–48 Read article
-
Mechanical characterization of Fiber glass Composites with Nano silica
Abstract: Epoxy-based fiber glass composites with enhanced strength by silica Nano particles checked for mechanical strength by addition of nanoparticles. Fiber glass Composites were prepared with glass fiber and nanoparticles containing resin, by infusion method. proper mixing of nanoparticles in resin was checked by various techniques. Viscosity of liquid resin reduced because of nanoparticles but still have good command to reinforce glass fibers. glass transition temperature (Tg) of polymer containing silica …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 49–58 Read article
-
Optimization of the Process Parameters Exceeding Extraction and Characterization of Gin Flavor from Juniper Berries
Abstract: The objective of this paper work was focused on extraction, optimization and characterization of the essential oil from the berries of juniper to Gin flavor. A Juniper Berries of community family was the raw material of the investigational research which was collected from Chilimo forest 70 Km North West (NW) of Addis Ababa. First, the juniper berries was dried through sun drying. Then, the dried juniper berries were crushed in …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 5–20 Read article