International Journal of Mechanics and Design
LATTICE-BASED CELLULAR STRUCTURE DESIGN STRATEGY
Abstract
This research article has examined the objective of investigating the design processes orapproach for CAD modeling using open-source 3D modeling and graphics tools. Thisresearch focuses on CAD modeling and the numerous challenges and concerns associatedwith developing micro-lattice structures for the metal additive manufacturing process usingDFAM guidelines. These structures have been built for metal AM employing 3D-periodicregular and FGLSs (homogenous and heterogeneous) with varied unit-cell types and sizes.Another purpose of this research is to create and characterize mesoscale lattice-based andTPMS-based cellular structures.Keywords
References (52)
- Deshpande VS, Fleck NA, Ashby MF. Effective properties of the octet-truss lattice
- material. Journal of the Mechanics and Physics of Solids. 2001; 49(8):1747-1769.
- doi:10.1016/S0022-5096(01)00010-2" rel="nofollow">https://doi.org/doi:10.1016/S0022-5096(01)00010-2
- Hučko B, Faria L. Material model of metallic cellular solids. Computers and
- Structures. 1997; doi:10.1016/S0045-7949(96)00310-" rel="nofollow">62(6):1049-1057.https://doi.org/doi:10.1016/S0045-7949(96)00310-
- Niinomi M. Recent metallic materials for biomedical applications. Metallurgical and
- Materials Transactions A. 2002; 33(3):477–486. doi:10.1007/s11661-" rel="nofollow">https://doi.org/doi:10.1007/s11661-
- Sypeck DJ. Cellular truss core sandwich structures. Applied Composite Materials.
- ; 12(3-4):229-246. doi:10.1007/s10443-005-1129-z" rel="nofollow">https://doi.org/doi:10.1007/s10443-005-1129-z
- Wadley H. Cellular metals manufacturing. Advanced Engineering Materials.
- ;4(10):726-733.https://doi.org/doi:10.1002/1527-
- (20021014)4:10 3.0.CO;2-Y
- Wadley H, Fleck NA, Evans AG. Fabrication and structural performance of periodic
- cellular metal sandwich structures. Composites Science and Technology. 2003;
- (16):2331-2343. doi:10.1016/S0266-3538(03)00266-5" rel="nofollow">https://doi.org/doi:10.1016/S0266-3538(03)00266-5
- Zok FW, Rathbun HJ, Wei Z, et al. design of metallic textile core sandwich panels.
- International Journal of Solids and Structures. 2003;40(21):5707-5722.
- doi:10.1016/S0020-7683(03)00375-5" rel="nofollow">https://doi.org/doi:10.1016/S0020-7683(03)00375-5
- Duda T, Raghavan LV. 3D Metal Printing Technology. IFAC- PapersOnLine. 2016;
- (29):103-110. doi:10.1016/j.ifacol.2016.11.111" rel="nofollow">https://doi.org/doi:10.1016/j.ifacol.2016.11.111
- Li Y, Yang C, Zhao H, et al. New developments of ti-based alloys for biomedical
- applications. Materials. 2014;7(3):1709-1800. doi:10.3390/ma7031709" rel="nofollow">https://doi.org/doi:10.3390/ma7031709
- Athanker P, Singh AK. Elastic and elasto-plastic analysis of Ti6Al4V micro-lattice
- structures under compressive loads. Mathematics and Mechanics of Solids. 2020;
- (4):591-615. doi:10.1177/1081286520959809" rel="nofollow">https://doi.org/doi:10.1177/1081286520959809
- Garciandia LE. Characterization of Rapid Prototyped Ti6Al4V Bone Scaffolds by the
- Combined Use of Micro-CT and in Situ Loading. Universidad Carlos III de Madrid;
- Hicks A, Doak H, Stucker B. Effects of Powder Variation on the Microstructure and
- Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting. 25th
- Annual International Solid Freeform Fabrication Symposium � An Additive
- Manufacturing Conference, Published online 2014:470-483.
- Kadkhodapour J, Montazerian H, Darabi AC, et al. Failure mechanisms of additively
- manufactured porous biomaterials: Effects of porosity and type of unit cell. Journal of
- the Mechanical Behavior of Biomedical Materials. 2015; 50:180-191.
- doi:10.1016/j.jmbbm.2015.06.012" rel="nofollow">https://doi.org/doi:10.1016/j.jmbbm.2015.06.012
- Li X, Wang C, Zhang W, et al. fabrication and characterization of porous Ti6Al4V
- parts for biomedical applications using electron beam melting process. Materials
- Letters. 2009; 63(3-4):403-405. doi:10.1016/j.matlet.2008.10.065" rel="nofollow">https://doi.org/doi:10.1016/j.matlet.2008.10.065
- Li X, Feng YF, Wang CT, et al. Evaluation of Biological Properties of Electron
- Beam Melted Ti6Al4V Implant with Biomimetic Coating in Vitro and In Vivo. PLoS
- ONE. 2012;7(12):1-12. doi:10.1371/journal.pone.0052049" rel="nofollow">https://doi.org/doi:10.1371/journal.pone.0052049
- Roy S, Panda D, Khutia N, et al. Pore geometry optimization of titanium (Ti6Al4V)
- alloy for its application in the fabrication of customized hip implants. International
- Journal of Biomaterials. 2014; 2014:1-12. doi:10.1155/2014/313975" rel="nofollow">https://doi.org/doi:10.1155/2014/313975
- Weißmann V, Bader R, Hansmann H, et al. Influence of the structural orientation on
- the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds.
- Materials and Design. 2016; 95:188-197.
- doi:10.1016/j.matdes.2016.01.095" rel="nofollow">https://doi.org/doi:10.1016/j.matdes.2016.01.095
- Tang Y, Kurtz A, Zhao Y. Bidirectional Evolutionary Structural Optimization
- (BESO) based design method for lattice structure to be fabricated by additive
- manufacturing. CAD Computer Aided Design. 2015; 69:91-101.
- doi:10.1016/j.cad.2015.06.001" rel="nofollow">https://doi.org/doi:10.1016/j.cad.2015.06.001