International Journal of Polymer Science and Engineering
Volume 10, Issue 1 (2024)
Table of contents
-
Extraction of Cellulose from Organic Waste forNanocomposites Synthesis with Red Mud andApplication
Abstract: This study focuses on the process of isolating cellulose from organic waste material and using it with red mud to create nanocomposites, with an emphasis on possible uses. After extraction, red mud is used as a reinforcing filler, and cellulose is added to nanocomposites using a simple synthesis technique. Red mud is a byproduct of refining alumina and has special qualities, such as large surface area and mineral content, that …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 1–7 Read article
-
Performance Enhancement of Cold Mix Asphalt via FlyAsh Substitution: Marshal Stability Results
Abstract: This study examines the enhancement of cold mix asphalt (CMA) performance through the substitution of fly ash at varying percentages. Specifically, Marshal stability tests were conducted on CMA mixtures with fly ash content of 0%, 2.5%, 5%, and 7.5%. The results reveal a significant increase in peak loads, with the CMA mixture containing no fly ash achieving a peak load of 0.62 kN, while mixtures with 2.5%, 5%, and 7.5% …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 16–21 Read article
-
Exploring Conductive Polymers for Flexible Electronics:Fabrication Techniques and Performance Analysis
Abstract: The advent of conductive polymers has heralded a new era in the development of flexible electronics, offering a unique blend of mechanical flexibility and electronic functionality. This paper explores the various fabrication techniques employed in the production of conductive polymers, with a particular focus on their application in flexible electronic devices. Key methods such as chemical vapor deposition, solution processing, and electrochemical polymerization are reviewed in detail, highlighting their advantages …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 22–28 Read article
-
Plant-Drive Natural Fiber Reinforced ThermoplasticComposites by Film Stacking Method
Abstract: Fiber reinforced polymer composites have a long history of being significant in a variety of applications because of their exceptional specific strength and modulus. An alternative to synthetic polymers that pollute the environment is provided by thermoplastic and vetiver fiber (VF) composites. In comparison to conventional reinforcing fibers (glass and carbon fiber), natural fibers (such as banana, sisal, coir, jute, vetiver, flax, hemp, and kenaf) have the following benefits: they …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 29–39 Read article
-
Hydrodynamic Study Through Computational FluidDynamics of Radial Flow Membrane Module
Abstract: Historically Crossflow Membrane modules came first in the membrane-based separation (MBS)process. Its high shear generation overcomes two non-idealities concentration polarization andsubsequent fouling. Primarily, high shear generation and large surface area create a positive domainfor large applications. Thereafter, feed flow rate-dependent shear generation creates a hindrance.This obstruction is overcome with Dynamic Shear Enhanced Membrane Filtration Pilot (DSEMFPs).Low surface area is a vital drawback of DSEMFPs. This radial flow membrane module with …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 8–15 Read article